Nuance comm Server D60709-22 User Manual download pdf (Page 46)

3 SafeCom Controller

D60709-22

3.4.5 Assign a fixed IP address to the SafeCom Controller

The IP address can be assigned via DHCP (dynamic or fixed) or manually. The

steps below describe how to assign a fixed IP address via the SafeCom

Controller web interface.

1. Open the Advanced Configuration web page (3.3.2).

2. Click TCP/IP.

3. Check Manual and enter the IP address etc.

4. Click Save and Continue.

5. Click Restart.

3.4.6 Select user identification

1. Open the Advanced Configuration web page (3.3.2).

2. Click SafeCom. Change Front End Identification.

3. Click Save and Continue to save your settings.

4. Select Restart. Click Restart again.

You must wait approx. 1 minute while SafeCom initializes. If the control panel

on the Sharp MFP does not reflect the change in the login screen then refresh

the screen by pressing the JOB STATUS button on the Sharp MFP and then the

COPY button.

3.4.7 Disable the Test button

To prevent unauthorized users from restoring factory default you can disable

the SafeCom Controller’s test button.

1. Open the Advanced Configuration web page (3.3.2).

2. Click General.

3. Change Enable Test Button to NO.

4. Click Save and Continue.

 Click Restart.

3.4.8 Enable Copy Control

1. Open the Advanced Configuration web page (3.3.2).

2. Click Printer and change Copy Enabled to YES and change Use auto

configuration to YES.

3. Click Save and Continue.

4. Click Restart.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 63 64

No comments

Nuance comm Server D60709-22 User Manual Page 46